Part of the FSX family of electro-optical flame detectors, the FS20X represents a quantum leap in integrating infrared and ultraviolet sensing technologies. Features & Benefits Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions Range greater than 200 feet to 1 sq. ft. heptane fire Arc welding immunity

A high-speed microprocessor based fire detection and process control system specially designed for liquid and powder coating applications, the FS System 10™ quickly detects the presence of a flame, reacts by initiating a shutdown of the electrostatic finishing process in a matter of milliseconds; and effectively interrupts the fire before residues and wet paint films can ignite.

Sophisticated software algorithms and dual microprocessors ensure that the FS24X has the highest fire detection performance combined with optimal false alarm rejection.

Electro-optical digital detectors represent leading edge UV and UV/IR technology. Features & Benefits Detects hydrocarbon and non-hydrocarbon based fires Built-in test for optical “through the lens” testing False alarm immunity

These multi-spectrum flame detectors sense radiant energy in the ultraviolet (UV), visible and WideBand InfraredTM (IR) spectrum.

Sensepoint XCL is a fixed gas detector that delivers the safety and compliance you expect — plus the affordability and ease of use that you don’t. It was designed especially for commercial and light industrial applications, delivering just the right amount of functionality to protect people on your premises and ensure compliance with regulations. Sensepoint XCL combines a simple yet robust mechanical housing with a gas detector app, so you can use everyday technology to set up and maintain your gas detector — and quickly get back to business. Sensepoint XCL is available as a flammable gas detector for the detection of potentially explosive gases, or as a toxic gas detector for the detection of a range of toxic gas hazards commonly found in commercial premises.

Thanks to Honeywell’s use of Bluetooth Low Energy (BLE) technology, you can install, commission and maintain your Sensepoint XRL gas detector — all from the palm of your hand. Simply pair the detector with your smartphone; then use Honeywell’s Sensepoint gas detector app to wirelessly perform many tasks — from adjusting set points to checking fault codes — from up to 10 meters away. Sensepoint XRL is available as a flammable gas detector for the detection of potentially explosive gases, or as a toxic gas detector for the detection of a range of toxic gas hazards commonly found in industrial facilities.

Touchpoint Plus is an easily configurable, wall mounted control system that supports up to sixteen channels of gas detection. Its intuitive user interface and modular approach enables you to take control of your safety system and configure it to meet your needs for a wide range of applications.

RAEGuard 2 PID is a fixed photoionisation detector (PID) that measures a broad range of volatile organic compounds (VOCs)

OELD is a smart junction box for either a Searchpoint Optima Plus or Searchline Excel gas detector. In addition to serving as a 4-to-20 milliamp (mA) communications bridge between the detector and the controller, the gas sensor junction box includes an LCD screen for gas concentration and other information, as well as a traffic-light indicator for at-a-glance safety status — all in a robust metal housing and with a wide range of approvals. OELD includes Bluetooth Low Energy (BLE) technology that simplifies your experience with the detector. With BLE, you can pair the OELD with a mobile phone and then use an app to perform many commissioning and maintenance tasks on the detector with less time and effort. And since the BLE method is non-intrusive, it also reduces safety risk.

For nearly 50 years, Honeywell Analytics has been protecting people who put their lives on the line every day. It takes a special level of drive and dedication to work in hostile environments, and we believe your workers deserve the same kind of commitment from us when it comes to securing their health and safety.

Searchline Excel is totally immune to interference from sunlight or any other sources of radiation such as flare stacks, arc welding or lightning. This is achieved by using a xenon flash lamp that is actually brighter than the sun at the infrared detection wavelengths and solid state detectors with a wide dynamic range. The lamp is also modulated to have a unique pulse duration and shape. The receiver then uses high speed digital signal processing to validate that all the signals received have this unique signature and rejects any extraneous signals.

Our team continues to develop advanced and innovative sensing technology, to create highly reliable, fit for purpose, cost effective gas detection solutions for the most demanding of environments. Experience in the design, manufacture, installation and maintenance of point infrared gas detection has resulted in a worldwide installed base of over 30,000 units operating from light industrial to the most demanding of offshore petrochemical applications. This expertise has resulted in Honeywell Analytics offering a new dimension in the supply of reliable infrared point gas detection with the release of the Searchpoint Optima Plus.

The Sensepoint XCD (Exceed) range of fixed gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard to working environments. Incorporating all the advantages of leading edge, fixed industrial gas detection technology, XCD offers high performance and reliability synonymous with the Honeywell brand. XCD is designed for a broad spectrum of industrial applications with a comprehensive choice of features and benefits in a truly cost effective package.

Overview Series 3000 MkII offers excellent reliability and ease of use with smart gas sensors which configure automatically when plugged into the transmitter. Onboard diagnostics provide a wealth of useful information during operation and fault finding routines. In addition, the patented ‘Reflex’ sensors test algorithms to ensure sensing elements are fitted and operational at all times. For extra flexibility, the remote sensor can be mounted up to 15m (50 feet) away from the transmitter making the Series 3000 MkII the ideal choice for applications where the point of detection is located in a hard-to-reach area, e.g. in high or low level concealed areas or inside a room with the transmitter located outside. The gas sensors available for the Series 3000 MkII include Oxygen, Carbon Monoxide, Hydrogen Sulphide, Chlorine, Sulphur Dioxide, Chlorine Dioxide, Nitrogen Monoxide, Nitrogen Dioxide, Hydrogen, Hydrogen Fluoride, Ammonia and Phosphine. Further releases will include Hydrogen Chloride, Hydrogen Cyanide and Ozone. Series 3000 MkII is ATEX, IECEx, UL and c-UL certified.

Overview The XNX Universal Transmitter marks a new turn in gas detection from Honeywell Analytics. It supports the widest range of sensors on a common platform and offers a modular choice of inputs and outputs. XNX is designed for flexible integration, simple installation, user friendly operation and straightforward maintenance. It is ideal for use with a range of gas monitoring controllers or industry standard PLCs. Users are assured of being protected in all conditions with Honeywell Analytics gas monitoring solutions.

Overview IQ Force rugged multi-gas detectors are simple to use, customizable andreliable – perfect in a variety of industrial applications. Monitoring for up to four gases including oxygen (O2), combustible gases (%LEL), hydrogen sulfide(H2S) and carbon monoxide (CO), IQ Force serves as a trusted workhorse,protecting workers day after day.

Features Single channel mode of operation for high integrity systems Catalytic bride or 4-20 mA input Muti-alarm mode for master, zoned and voted alarms Easy to calibrate and operate using a dedicated engineering card